Hex Bolt SS316 Size range: Available sizes typically range from M6 to M36 (metric) or 1/4" to 1-1/2" (imperial), with lengths depending on the application requirements. SS316 hex bolts are also available with PTFE Coating. PTFE Coated Hex Bolt SS316 DIN 933 A4 Hex bolt A4-70 ISO4017 ISO4014
Components of a Flange Isolation Kit Type E A 3,2 mm (1/8 inch) thick plated steel washer B 3,2 mm (1/8 inch) thick insulating washer C Full length insulating sleeve D Full face Gasket
Components of a Flange Isolation Kit A typical flange isolation kit includes: Isolation Gasket: Types: Full-face, ring-type, or specific designs like the API RTJ. Materials: Phenolic, PTFE (Teflon), G10/G11 (fiberglass-reinforced epoxy), or high-temperature options like mica or spiral-wound designs. Isolation Sleeves: Insulate the bolts from the flange. Made of non-conductive materials like Mylar, G10, or Nomex. Isolation Washers: Two per bolt (one insulating, one metallic for load distribution). Materials: Nylon, phenolic, or G10. Metallic Washers:
ASTM A453 Grade 660 is categorized into four classes: A, B, C, and D, each defined by specific mechanical properties and heat treatments. Nom Dia: ¼ to 4″ [6-100 mm] Tailor made if required. Length: As Per Standard or Upto any Length SPECIFICATION / STANDARD :ASTM / ASME / BS / DIN / BS EN ISO MATERIAL :1.4980,ASTM A453 grade 660 THREADS :UNC, 8UN, UNF, Metric Coarse & Fine Series.
ASTM A193 B8T Stud bolt specification SIZE:1/4″ – 4″, M6 -M100. And 600mm Max length. THREAD:ASME B1.1 , UNC, UNF, CLASS 2A FINISHED:Plain, PTFE coated
Stud Bolts & Hex Nuts Material for Flanges The Stud Bolt is a threaded rod assembled with 2 heavy hexagon nuts,normally 1 hex nut on each end. Stud Bolts general The quantity of bolts for a [...]
Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY® alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy. Alloy 800 HT also known as 1.4959,which is an austenitic high-strength solid-solution nickel-iron-chromium alloy. Fluoropolymer coatings (e.g., PTFE) can be applied to Incoloy 800HT stud bolts for additional chemical resistance or non-stick properties
ASME B1.1 - Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms) Defines thread specifications, including UNC (Unified National Coarse) and UN8 (8 threads per inch), commonly used for stud bolts. Download the ASME B1.1 [...]
Stud Bolts Dimensions chart for RF-RTJ flanges ASME B16.5 Stud bolts are fully threaded fasteners used in flange connections in piping systems. ASME B16.5 provides guidelines for flange dimensions, and the associated stud bolt lengths are [...]
UNS N08926 Stud Bolt is widely used in chemical reactors, tanks, valves, pumps, and heat exchangers due to its resistance to acidic environments, particularly sulfuric acid and phosphoric acid. Due to its excellent resistance to chloride-induced corrosion, N08926 stud bolts are commonly used in marine applications like offshore oil rigs, seawater systems, and shipbuilding. N08926 stud bolt is used in desulfurization systems, gas turbines, and boilers, especially in environments subject to high temperatures and acidic condensates.
