ASTM A453 Grade 660 is categorized into four classes: A, B, C, and D, each defined by specific mechanical properties and heat treatments. Nom Dia: ¼ to 4″ [6-100 mm] Tailor made if required. Length: As Per Standard or Upto any Length SPECIFICATION / STANDARD :ASTM / ASME / BS / DIN / BS EN ISO MATERIAL :1.4980,ASTM A453 grade 660 THREADS :UNC, 8UN, UNF, Metric Coarse & Fine Series.
ASTM A193 B8T Stud bolt specification SIZE:1/4″ – 4″, M6 -M100. And 600mm Max length. THREAD:ASME B1.1 , UNC, UNF, CLASS 2A FINISHED:Plain, PTFE coated
Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY® alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy. Alloy 800 HT also known as 1.4959,which is an austenitic high-strength solid-solution nickel-iron-chromium alloy. Fluoropolymer coatings (e.g., PTFE) can be applied to Incoloy 800HT stud bolts for additional chemical resistance or non-stick properties
UNS N08926 Stud Bolt is widely used in chemical reactors, tanks, valves, pumps, and heat exchangers due to its resistance to acidic environments, particularly sulfuric acid and phosphoric acid. Due to its excellent resistance to chloride-induced corrosion, N08926 stud bolts are commonly used in marine applications like offshore oil rigs, seawater systems, and shipbuilding. N08926 stud bolt is used in desulfurization systems, gas turbines, and boilers, especially in environments subject to high temperatures and acidic condensates.
China 904L Stainless Steel Stud Bolt,1.4539 Stud Bolt manufacturer,UNS N08904, contains high levels of chromium, nickel, molybdenum, and copper, which provide excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. These bolts are widely used in industries such as chemical processing, oil and gas, and marine applications.
SS316 Stud bolt Stainless Steel SS316L Thread Rod 1 ¼” x 8UN SS316 Stud bolts is made of Stainless steel round bar with fully or partail threaded.It is also challed B8M in ASTM A193 and ASTM A320 standard ,SS316 also known as A4 grade in DIN standaerd. People also call the stud bolt as threaded rod.
We are professional manufacturer of UNS S66286 Stud Bolt W.Nr.1.4980 Thread Rod in china UNS S66286 Stud Bolt refers to a stud bolt made from A-286 stainless steel (UNS S66286), a high-performance, iron-based superalloy that provides excellent strength, oxidation resistance, and corrosion resistance at high and cryogenic temperatures Stainless Steel Alloy A286 | UNS# S66286 is an iron-based austenitic super-alloy that exhibits high strength and good corrosion resistance. A286 offers high ductility and is superior to many other commercial alloys with comparable properties. 1.4980 Equivalent Grades STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN 1.4980 1.4980 S66286 - - [...]
ASTM A193 Grade B8 Stud bolt thread specification Threads shall be Unified inch coarse thread series (UNC), Class 2A, for all stud bolt sizes 1 in. and smaller, and Unified inch 8 thread series (8 UN), Class 2A, for all stud bolts larger than 1 in., in accordance with ANSI/ASME B1.1. Acceptability of screw threads shall be determined based on ANSI/ASME B1.3. Standard: ASME B18.2.1/ASME B18.2.2, DIN975/DIN976, Diameter: 1/4"-5",M6-M125
A UNS N10276 hex bolt, commonly known as a Hastelloy C276 hex bolt, is a fastener made from a nickel-molybdenum-chromium alloy with outstanding resistance to corrosion in a wide range of severe environments. These bolts are primarily used in applications requiring exceptional resistance to oxidizing and reducing agents, making them suitable for chemical processing, marine, and high-temperature environments.
ASTM A320 B8M Stud BOLT and A194 8M HEX NUTS,Grade B8M Stud Bolt is made from 316 stainless steel, a type of fastener designed for use in pressure vessels, flanges, valves, and other high-stress applications, particularly in environments where corrosion resistance and low-temperature toughness are critical.
