We are the professional manufacturer of Galvanized STEEL Cylinder Restraint Kit in China
Cylinder Restraint Kit could be made in Stainless steel ,Galvanized steel.
Galvanized Cylinder Restraint Kit normally is recommended used in indoor serivce
Cylinder Seismic Restraint Kit
Galvanized steel 3 Strap Cylinder Restraint Kit is recommended used for indoor service,
The Galvanized Strap Seismic Cylinder Restraint Kit consists of 4 or 6 meters of perforated Galvanized strap and all brackets, bolts, screws & tensioning devices required to make a 2-3 strap installation of this kit.
These are used for Seismic Earthquake Protection and security for hot water cylinders and storage vessels, as well as meeting requirements for the restraint of new installation
| Contents of Kit | Amount Supplied |
| Perforated Steel Strap | 2 Meters |
| Mounting Brackets | x 2 |
| 14g x 55mm Screws (Type 17) | x 2 |
| M5 x 12mm Bolts & Nuts | x 4 |
| Tensioning Device | x 1 |
| Vessel Capacity (Litres) | No. of Straps Required |
| Up to 200 | 2 |
| 200 – 360 | 3 |
| 360 – 500 | 4 |
| 500 – 600 | 5 |
| 600 – 700 | 6 |
| When in Excess of 12m above ground level | As Above +1 |
All cylinders must be protected from being knocked over, falling and/or impact damage to comply with AS4332-2004, section 5.2(g). This is regardless of whether full or empty or in or out of operation.
All cylinders, as per G12, must be suitably restrained against seismic activity.
While our Cylinder Restraint Kits offer a safe and convenient load restraining in a variety of industrial applications.
Our Galvanized Cylinder Restraint Kits made of corrosion-resistant materials, this kit offers essential support to prevent cylinder movement. Suitable for both residential and commercial installations, the kit includes all necessary mounting hardware, and is engineered to meet New Zealand’s seismic standards, NZS 4219:2009,making it a reliable choice for safety-conscious installations.
Includes
- 4M Galv Strapping
- 4x L-Brackets
- 4x 65mm Tek Screws
- 4x M6x12mm screws and nuts
- 2x Tensioners
- 2x M6x30mm screws
NZS 4219:2009
Seismic performance of engineering systems in buildings
Sets out the criteria for the seismic performance of engineering systems related to a building’s function. This standard will be particularly useful for sub-trade work in multi-storey apartment and commercial buildings. It covers the design, construction and installation of seismic restraints for engineering systems such as air-handling units, tanks, cabinets, pipework and ductwork. To demonstrate compliance with the New Zealand Building Code’s earthquake resistance requirements, it must be read along with Verification Method B1/VM1. Buildings with importance level 5, large mass items, structures external to the building, lifts, building contents, and fire sprinkler systems are excluded from this Standard.